CRKT - Zilla-Tool
Model Number | 9060 |
Length Closed | 6.5'' (16.51cm) |
Length Open | 9.625'' (24.45cm) |
Weight | 7.4oz (209.7g) |
Handle Material | Glass Filled Nylon, Liner 2CR13 |
Sheath | Nylon
Sheath, Stainless steel clip |
Plier Opening | Fixed Pliers, spring loaded |
Components | 7 |
PREVIOUS | NEXT |
Manufacturers Description:
Launce Barber and Tom Stokes designed the
patented* Zilla-Tool™ as part of our innovative I.D. Works™ line
of tools. It really is the monster tool, with a comfortable
ergonomic handle that lets you get a lot of work done.
The pliers jaws are spring loaded, with a slight needle nose
taper. They have both fine flat and circular toothed gripping
surfaces. Near the base of the pliers, is a very useful wire
cutter and also a notch near the handle for wire stripping.
You can store the two screwdriver hex bits in the Zilla-Tool's
handle reliefs. It also accepts other standard hex bits.
To open the knife blade quickly, just press the little
"flipper." It also acts as a blade guard when the blade is open.
Metallic surfaces are bead-blast, while the Zilla-Tool's rugged
scales are injection molded black glass filled nylon.
The custom stainless steel clip will hold the Zilla-Tool in your
pocket or on gear, or it can be removed if you want to use the
included nylon sheath with belt loop and snap closure.
The Zilla-Tool can open bottles too, using the end of its pliers
handle.
*U.S. Pat. No. D557,100
Components:
- Slight Needlenose taper fixed pliers, spring
loaded
- Wire cutter
- Wire Stripper
- Knife, 3" (7.62cm) Modified spear point, Hollow grind Bead-Blasted, Triple point
Serrations, 2CR13 material,
51-53HRC, 0.096" (2.4mm) Thick
- Bottle opener using the end of plier handle
- Screwdriver using two interchangeable bits